System Compatibility

 

VuQube customers are providing feedback about their enjoyment of having their shows anywhere at any time. We are also receiving feedback to provide more in-depth details about specific system compatibility. By providing this information we hope to eliminate frustrations caused by using, for example, a receiver that is hard to configure. Because Satellite TV is continually changing to enhance customer experience – new receiver types, HDTV, etc. - we cannot guarantee that this page is always fully up-to-date. We can guarantee, however, that we will make our best effort to provide you with the necessary information to enjoy your VuQube and your Satellite TV experience. 

Quick Notes to help while we are putting this page together:

VuQube has a single out-put. What this means is that you need to use a SINGLE TUNER receiver. For DISH Network we recommend the 301 or 311 receivers.  For DIRECTV, we recommend the D11 or D12 receivers.

HDTV. The VuQube CAN receive HD signal with DISH Network.  The VuQube CANNOT receive HD signal with DIRECTV.  We are busy working on updating the VuQube to receive the new Ka band HD signal from DIRECTV but not there yet.  The update for DIRECTV will be a new system and so current VuQubes can not be upgraded.   So, what this means is that if you have DIRECTV you will not be able to receive your HD programming.

Multiple Satellite Programming .  The VuQube can be used with programming on multiple satellites but it is very important to know that the VuQube “locks-on” to one satellite signal at a time.  For multiple satellite programming like DISH 500, you will need to switch between satellites to receive all of your programming.  This is easily accomplished following the user instructions but has been reported back by some customers to be a bit slow at times.  We are working on improving this interface, but if you have DISH 500 or DISH 1000, switching between satellites will currently take some patience.  Remember you can always call us for help!